Although membrane switches are used in different industries and fields, many aspects need to be paid attention to in the process of using membrane switches,
1. When the membrane switch is used, the surface shall be kept clean. At the same time, there shall be no bulge, and proper dust and oil pollution prevention treatment shall be carried out.
2. Compare the size (put the membrane switch at the place to be posted, and compare the size with the orientation to see if it's just right);
3. Remove the centrifugal paper under the membrane switch by one centimeter from the edge;
4. Then put the membrane switch in the corresponding position and stick a part, and then gradually tear off the remaining centrifugal paper (but hold it at an angle of no more than 15 degrees), and then stick it to the corresponding position in turn.
5. In the process of posting, if the membrane switch without centrifugal paper is torn off, it needs to be placed first, and it should not be placed upward to prevent sticking to other objects from affecting the posting;
6. Precautions: the posting cannot be repeated and needs to be completed at one time; Pay attention to control the tearing angle; When trying to press the feel, it should be placed in a flat place, not in the hand, otherwise it will easily damage the membrane switch.
1. When the membrane switch is used, the surface shall be kept clean. At the same time, there shall be no bulge, and proper dust and oil pollution prevention treatment shall be carried out.
2. Compare the size (put the membrane switch at the place to be posted, and compare the size with the orientation to see if it's just right);
3. Remove the centrifugal paper under the membrane switch by one centimeter from the edge;
4. Then put the membrane switch in the corresponding position and stick a part, and then gradually tear off the remaining centrifugal paper (but hold it at an angle of no more than 15 degrees), and then stick it to the corresponding position in turn.
5. In the process of posting, if the membrane switch without centrifugal paper is torn off, it needs to be placed first, and it should not be placed upward to prevent sticking to other objects from affecting the posting;
6. Precautions: the posting cannot be repeated and needs to be completed at one time; Pay attention to control the tearing angle; When trying to press the feel, it should be placed in a flat place, not in the hand, otherwise it will easily damage the membrane switch.
