I believe everyone is no stranger to the touch switch, and its simple structure has won the love of many consumers. Let's talk about the precautions for the touch switch to avoid danger of use.
1. Be cautious when installing the tact switch. If it becomes loose during welding, it must be reinforced in time to prevent it from falling off.
2. When welding the switch twice in a row, the product must be aired to room temperature before welding again, so as not to cause material deformation and easily cause falling off.
3. Be careful not to use plate washer water.
4. When using the switch, pay attention not to use excessive force to avoid damage.
5. Try not to use it destructively.
6. When using, try to press the center position to avoid damage to the parts.
7. After installation, please contact after-sales maintenance due to problems arising from the installation and welding process.
8. For the corrosive gas materials generated during the installation and welding process, the damage to the switch caused by the switch will also cause the use of danger, so you must pay attention to it before use.
9. For models that are not airtight, foreign matter may enter the switch and easily cause a short circuit. Please be careful.
10. The last and most important point is to avoid touching the switch with wet hands.
In fact, the touch switch is the most commonly used type of switch, so you must be aware of these precautions.
1. Be cautious when installing the tact switch. If it becomes loose during welding, it must be reinforced in time to prevent it from falling off.
2. When welding the switch twice in a row, the product must be aired to room temperature before welding again, so as not to cause material deformation and easily cause falling off.
3. Be careful not to use plate washer water.
4. When using the switch, pay attention not to use excessive force to avoid damage.
5. Try not to use it destructively.
6. When using, try to press the center position to avoid damage to the parts.
7. After installation, please contact after-sales maintenance due to problems arising from the installation and welding process.
8. For the corrosive gas materials generated during the installation and welding process, the damage to the switch caused by the switch will also cause the use of danger, so you must pay attention to it before use.
9. For models that are not airtight, foreign matter may enter the switch and easily cause a short circuit. Please be careful.
10. The last and most important point is to avoid touching the switch with wet hands.
In fact, the touch switch is the most commonly used type of switch, so you must be aware of these precautions.
