DC socket is an indispensable electronic component in daily life. Its application range includes household appliances, televisions, computer equipment, audio equipment, electronic equipment and so on. Do you know the principle, application, classification and problems that are easy to be ignored in the installation of DC sockets? For example, how does the DC socket connect to the power cord? What else should we pay special attention to in the actual operation of DC socket welding? If you are not a technical person, you must know very little about it. Now let's explain in detail how to connect the power cord and weld the DC socket.
Dc1B01-1151A-9T
DC socket connection method
Step 1
About how to connect the power cord of the DC socket, it is generally connected according to the instructions of left zero, right fire, medium grounding, etc. Then for the connection, it is necessary to confirm the two key points of connection, that is, to find out the zero line and the live line respectively.
Step 2
The first thing to operate is to use professional tools to detect the circuit and find out the live wire.
Step 3
At this time, after finding out the live wire, connect the live wire into the right hole of the DC socket, and then connect a 2.5mm insulated wire from the other hole of the DC socket into one of the other two holes of the socket.
Step 4
Then find out that the zero line is directly connected to the left pin hole of the DC socket and firmly connected.
Step 5
Finally, the two key connection points in front are connected, and the rest of the ground wire can be connected into the pin hole in the middle of the DC socket.
DC-480
DC socket welding instructions
1. The flux added in the welding operation of DC socket should not be too much or too little. Too little will lead to unstable welding, and too much may lead to welding through the pins of DC socket. So add an appropriate amount of flux.
2. Before welding the DC socket, make sure that the oxide or sundries on its Luo iron are cleaned up. Otherwise, it is easier to cause some phenomena such as false soldering.
3. After the welding of DC socket is completed, be careful not to touch the welding contact with your hand, so as to avoid scalding and other accidents. It should wait a few minutes until the welded joints of the socket are completely cooled, and then check whether there are problems such as looseness or faulty welding.
Dc1B01-1151A-9T
DC socket connection method
Step 1
About how to connect the power cord of the DC socket, it is generally connected according to the instructions of left zero, right fire, medium grounding, etc. Then for the connection, it is necessary to confirm the two key points of connection, that is, to find out the zero line and the live line respectively.
Step 2
The first thing to operate is to use professional tools to detect the circuit and find out the live wire.
Step 3
At this time, after finding out the live wire, connect the live wire into the right hole of the DC socket, and then connect a 2.5mm insulated wire from the other hole of the DC socket into one of the other two holes of the socket.
Step 4
Then find out that the zero line is directly connected to the left pin hole of the DC socket and firmly connected.
Step 5
Finally, the two key connection points in front are connected, and the rest of the ground wire can be connected into the pin hole in the middle of the DC socket.
DC-480
DC socket welding instructions
1. The flux added in the welding operation of DC socket should not be too much or too little. Too little will lead to unstable welding, and too much may lead to welding through the pins of DC socket. So add an appropriate amount of flux.
2. Before welding the DC socket, make sure that the oxide or sundries on its Luo iron are cleaned up. Otherwise, it is easier to cause some phenomena such as false soldering.
3. After the welding of DC socket is completed, be careful not to touch the welding contact with your hand, so as to avoid scalding and other accidents. It should wait a few minutes until the welded joints of the socket are completely cooled, and then check whether there are problems such as looseness or faulty welding.
