1. Soldering: the wiring design and soldering method should avoid causing the molten tin to flow to the upper plane of the PC board, which will cause poor contact.
2. Use flux with caution: avoid using water-soluble flux when soldering tin, otherwise it will have adverse effects on the metal and other materials constituting the toggle switch.
3. Length of sliding handle: the shorter the length, the better. When the width of the sliding handle remains unchanged, the shorter the length of the sliding handle, the better the hand feel, and the higher the output point, the worse the hand feel.
4. Low temperature work: when the product is used in low temperature environment, such as car radio or car audio in cold zone, the company provides comfortable products according to customer requirements. Please explain when ordering.
2. Use flux with caution: avoid using water-soluble flux when soldering tin, otherwise it will have adverse effects on the metal and other materials constituting the toggle switch.
3. Length of sliding handle: the shorter the length, the better. When the width of the sliding handle remains unchanged, the shorter the length of the sliding handle, the better the hand feel, and the higher the output point, the worse the hand feel.
4. Low temperature work: when the product is used in low temperature environment, such as car radio or car audio in cold zone, the company provides comfortable products according to customer requirements. Please explain when ordering.
5. Use chemicals with caution: the bottom plate of the toggle switch uses synthetic resin such as polycarbonate, so the potentiometer should not be exposed to the strong atmosphere of chemicals such as ammonia, amine, alkali solution, Sudan, ketone, ester and halohydrocarbon.
