Although membrane switches are used in different industries and fields, many aspects need to be paid attention to in the process of using membrane switches,




1. The surface of membrane switch shall be kept clean when used. At the same time, there should be no bulge, and proper dust and oil pollution prevention treatment should be carried out.



2. Compare the size (put the membrane switch at the place to be posted and compare the size with the orientation to see if it happens);



3. Remove the centrifugal paper under the membrane switch from the edge by one centimeter;



4. Then put the membrane switch in the corresponding position and stick a part, and then gradually tear off the remaining centrifugal paper (but when the angle should not exceed 15 degrees), and then stick it to the corresponding position in turn.



5. In the process of posting, if the membrane switch without centrifugal paper is torn off, it needs to be placed first. It should not be placed upward to prevent sticking to other objects from affecting the posting;

6. Precautions: the posting cannot be repeated and needs to be completed at one time; Pay attention to control the tearing angle; When trying to press the feel, put it in a flat place and don't press it in your hand, otherwise it will easily damage the membrane switch.