Pay attention to common sense when touching the switch



Pay attention to common sense 1



Touch the switch not only pay attention to daily use, but also pay attention to daily storage. When storing the daily touch switch, pay attention to the moisture-proof of the switch, and seal the switch when necessary to prevent aging of the internal components of the touch switch.



Pay attention to common sense 2



When gently touching each foot of the switch for operation and welding, be careful not to apply too much load between the feet, so as to avoid looseness, welding penetration, deformation and other phenomena in the welding of the foot of the switch.



Pay attention to common sense 3



When the shell of the light touch switch breaks, the charged metal copper inside the switch will also be exposed. It is recommended to replace the switch immediately, otherwise it is very simple to form electric shock and other incidents in the application of the switch. It should also be noted that when your hands are wet, do not touch the switch to avoid electric shock.



Pay attention to common sense 4



When lightly touching the switch for reflow soldering, it is likely that rosin and other flux will enter the switch due to some non-standard operations, resulting in some poor touching and other phenomena in the application of the switch. Therefore, appropriate antirust oil can be added at this time. Its purpose is to clean the rosin on the internal contact of the switch and make the switch recover its function. Be careful not to use industrial alcohol for internal cleaning, because industrial alcohol will corrode the metal part of the switch, and then cause the switch to lose its function.



Pay attention to common sense 5



When installing the light touch switch in some wet places, it is recommended to generally select the waterproof light touch switch to use the device. Under the humid environment, if it is not a waterproof switch, it will simply cause the components inside other switches to become damp and lead to failure.



Pay attention to common sense 6



When storing the light touch switch, be careful not to store it when the switch is fully pressed, otherwise the metal shrapnel inside the light touch switch will be slightly damaged.



Pay attention to common sense 7



Due to the high induction activity of the light touch switch, be careful not to press the key or knead too hard in the daily use and maintenance of the switch. Otherwise, the sensitivity of the switch induction will be reduced in the use of the light touch switch.

Due to the time, the common sense of paying attention to the light touch switch described above can only explain this. As for the aging of the touch switch, be careful not to operate the touch switch repeatedly. They all have a service life. If the touch operation is repeated, the service times of the touch switch will be reduced.